Sinker Ultrasonic Machine (SUM)

Summary
The Sonic-Mill® sinker ultrasonic machine uses a power supply that converts conventional line voltage to 20KHz electrical energy. This high-frequency electrical energy is provided to a piezoelectric converter that changes high-frequency electrical energy into mechanical motion. The ultrasonic motion from the converter is amplified and transmitted to the horn and cutting tool. This causes the horn and attached cutting tool to vibrate perpendicularly to the tool face thousands of times per second with no side to side motion.

A recirculating pump forces E/Z Pump™ abrasive, suspended in a liquid medium, between the vibrating tool face and the workpiece. The abrasive particles strike the workpiece at 150,000 times their own weight. These tiny abrasive particles chip off microscopic flakes and grind a counterpart of the tool face.

Benefits
With Sonic-Mill® sinker unltrasonic machining, the work material is not stressed, distorted or heated because the grinding force is seldom over two pounds. There is never any direct tool-to-work contact and the presence of the cool slurry makes this a cold-cutting process.

Rotary Ultrasonic Machine (RUM)

Summary
The Sonic-Mill® rotary ultrasonic machine uses a power supply that converts conventional line voltage to 20Khz electrical energy. This high-frequency electrical energy is provided
to a piezolectric converter that changes the high-frequency electrical energy into mechanical motion. The ultrasonic motion from the converter is amplified and transmitted to the rotary spindle. This causes the diamond tool attached to the spindle to vibrate perpendicular
to the tool face thousands of times per second, with no side-to-side motion.

The spindle speed is variable between
0 and 8,000rpm. This rotation, along
with the ultrasonic motion, enhances the cutting action of the attached diamond-plated or diamond-impregnated tool.

Benefits
The combined action of the rotary ultrasonic motion plus a water coolant produces a self-cleaning action that reduces diamond tool binding. This enables fast, efficient cutting at a lighter tool pressure than with conventional machining. Lighter tool pressure is advantageous for drilling small-diameter holes, long deep holes and adjacent holes that are very close to one another. The rotary ultrasonic action causes reduction in friction between the tool and the workpiece which extends diamond tool life and reduces stress caused by conventional diamond tool machining.

Sinker Model AP-1000

Sinker Model A-10HCV

Rotary CNC Series 10 Bedmill

Rotary Series 10 Kneemill